More bulkheads and details in the port side half

I made all the remaining bulkheads in the port side hull after joining both main hull halves. Aligning these bulkheads with the already installed ones above is much easier this way. In the bow area I also prepared a second carbon chainplate, positioned at the front of the anchor well and intended for a heavy jib or storm jib. As this is not part of the original design, I developed my own solution. In hindsight, this extra chainplate was not fitted in the final completed boat.

All the thinking about the cockpit coaming and shelves had already been done in the starboard half. Copying this layout to the port side was therefore straightforward and could be completed in a single weekend. With this work done, the interior of the main hull is finished for now. The next steps are removing the frames and turning the hull upside down.